dash2 dash1

Electric Wheelchair Lift (Non Passenger)

The KCI Electric Wheelchair Lift eliminates the need for ground handling personnel to lift wheelchairs on to the belt loader during ground operations. The lift bed is electrically operated and utilizes limit switches to automatically stop the lift bed when it reaches critical points such as the upper height limit as well as when it encounters the belt on the belt loader. The Electric Wheelchair Lift can be plugged in to a standard 115 Volt GFCI protected outlet when not in use to recharge the batteries and the battery charger will not overcharge or damage the batteries if left plugged in for extended periods of time.

 

Input power supply: 115 VAC receptacle with GFCI interrupt protection
Battery charger: 12 Volt
Circuit breaker: 50 Amps
Battery: 12 Volt 35 AH AGM VRLA
Switches: 3-position toggle from center, Off/Up/Down,
Limit Switches: 3 Total, (2) Cable limit, (1) Carriage limit
Winch: 12 VDC 100 Amps. max
Capacity: 500 lbs.
Motor: 1.0 H.P.
Range: Standard range is 0-42″, other heights available by request